Thanks for your browsing the website

Product samples for Jiangyin Spark Electronic Technology Co., LTD. Are exhibited in GMPC of ETW Japan .

Address: AIM Bld.1F Asano3-8-1 Kokurakita-Ku Kitakyushu city Japan

Open Time: Monday ~ Friday Tokyo 9:30-17:30 (All Year)

Booth No.: 16

Details: jp.etwgmpc.com

T36 Mini Clip-on Split Core Current Sensor

T36 Mini Clip-on Split Core Current Sensor

The T36 mini clip-on split core current sensor is designed for the purpose of fast, easy installation. The split core permits non-contact current measurements through magnetic field induction without the primary wire being taken offline or disconnected. This product permits a safer, easy and portable current measurement.

Technical Parameters
Maximum continuous primary current 600A AC
Current ratio 3000: 1
Output voltage 0.333 Volt at rated current
Accuracy ± 1% from 5% to 120% of rated current
Insulation voltage 600V, AC
Maximum primary voltage 5000V, AC (Insulated Conductor)
Phase angle Less than 2 degrees at 50% of rated current
Frequency Range 50 Hz to 400 Hz
Operating Temperature -15Cto 60C
Leads 4Foot(105cm), UL 1015, Twisted Pair, 0.34 mm2(22AWG)
Certificated CE recognized, and RoHS compliant
Customization Output current
leads

Applications
This mini clip-on split core current sensor is usually applied onto the following devices.
1. Sub-metering accurate measurement equipment
2. Data loggers for analyzing the building and machinery performance
3. Digital fault recorders
4. Smart grid application features
5. Load center
6. Three phase balance control
7. In-factory display in-home display
8. Inverters for solar and wind turbine systems
9. Power measurement device for PLC

Feedback Form
Other Products
  • T10 Mini Clip-on Split Core Current Sensor The T10 mini clip-on split core current sensor has the smallest maximum input current among the SCT series. Its model name is SCT-T10. This product can turn the input current into smaller output 0.333V or mA for safe test by measuring devices. It can be used in portable instruments, sub-metering, and monitor motor loads, etc. ..
  • T16 Mini Clip-on Split Core Current Sensor With 100A AC maximum continuous primary current and accuracy of 1.0, this split core current transformer can precisely turn AC current from 5A to 150A (max rated current) passing through the center conductor into smaller current in 0.333V or mA. The suggested load resistance is no more than 50ohm. Due to the split core structure...