Thanks for your browsing the website

Product samples for Jiangyin Spark Electronic Technology Co., LTD. Are exhibited in GMPC of ETW Japan .

Address: AIM Bld.1F Asano3-8-1 Kokurakita-Ku Kitakyushu city Japan

Open Time: Monday ~ Friday Tokyo 9:30-17:30 (All Year)

Booth No.: 16

Details: jp.etwgmpc.com

  • 10A Zero Phase Current Transformer The 10A zero phase current transformer is applied to small current monitored circuit. When the monitored circuit fails, it can turn 10A input current into zero phase current ranging from 10mA to 1,000mA and control the switching of circuits. It has high sensitivity and ...
  • 200A Zero Phase Current Transformer The 200A zero phase current transformer can endure input current ranging from 50A to 100A. If the monitored circuit malfunctions, it can output zero phase current which is 500 times smaller than the input current with the suggested 500 turns ratio so that the power supply is cut off to protect the electric equipment...
  • 1000A Zero Phase Current Transformer The 1,000A zero phase current transformer can endure system current ranging from 800A to 1,000A which is the largest among this series. With suggested 1,000 turns ratio, the zero phase current generated is 1,000 times smaller than the system current ...
  • 400A Protection Current Transformer The 400A protection current transformer has a relatively small input current value. The two different models can respectively turn 200A input current and 400A input current into 100mA small current output so that the circuit is cut off to protect the whole system...
  • 600A Protection Current Transformer The 600A protection current transformer can endure at most 8 times overload. It has wide current measuring range and high consistency. Customers can choose from the black models and the white models...
  • 800A Protection Current Transformer The 800A protection current transformer can be divided into two models. They can both work on high testing current, and respectively turn 600A and 800A input current into 100mA output current, thus cutting of the circuit to protect electric equipment. It can endure at most 8 times overload...
  • 200A Generator Current Transformer Due to the CD silicon steel core, the 200A generator current transformer has excellent on-load performances. It can endure 8 times overload. It has integrated primary high current brass plate, so operation is very simple...
  • 400A Generator Current Transformer The 400A generator current transformer has excellent on-load performances due to the CD silicon steel core. It has integrated primary high current brass plate...
  • 600A Generator Current Transformer The 600A generator current transformer adopts CD silicon steel core to realize excellent on-load performances. It can endure 8 times overload, and has integrated primary high current brass plate to make operation much easier...
  • 800A Generator Current Transformer The 800A generator current transformer can perform protection even if the malfunctioned current reaches 800A. The turns ratio of this product is 2,778, so the current can be shrunk 2,778 times, and the circuits are switched under control...
  • 1.5A 3 Phase Current Transformer The 1.5A 3 phase current transformer is used for small input current. It can convert 1.5A input current to 5mA output current so that the test and measurement of current and control and protection of system can be performed. As a high-accuracy current transformer, the error in current conversion ratio is no more than 0.1% ...
  • 200A 3 Phase Current Transformer The 200A 3 phase current transformer has not only a small and exquisite appearance, but also good working performances. The overload and on-load performances are satisfying, while the consistency is pretty good...
  • Φ25 Three Phase Current Transformer The two models of the Φ25 three phase current transformer can both handle large input current, and respectively convert 100A and 200A input current into 50mA and 100mA output current in rated condition. The suggested load resistance at the output is less than 100ohm.
  • High Frequency Transformer Compared with low frequency transformer made of silicon steel sheet, our high frequency transformer comes with a much smaller size, but the effective sectional area of the magnetic core is 17.1mm2. Thanks to the design of vertical or horizontal 0.6mm diameter pins structure, the installation and operation ...
  • Power Transformer Our power transformer can convert a certain AC voltage into another voltage while keeping the frequency unchanged to facilitate the use of equipment with different rated voltages. It is generally adaptable to a wide range of environmental conditions...
  • DR Inductor The DR inductor is a small electric component which occupies a small area on PCB. The four models of our DR inductor mainly differ in appearance. The two pins of the PK model are on the same side, while the VC model put the pins on separated sides.
  • Common Mode Inductor The common mode inductor has a wide select range of inductance and current. With the pins structure, it can be easily mounted on PCB. The dielectric strength is AC 2kV/1mA...
  • Toroidal Inductor Choke Coils The toroidal inductor choke coil can be easily mounted on PCB vertically or horizontally. The select range of inductance and current is quite wide. This safe and reliable product comes in various models...
  • Chip Inductor The chip inductor can store much energy in its slim and tiny body. The DC resistance is very low...
  • DJR100W Industrial Heat Sink The DJR100W industrial heat sink is a small-size white model with 142cm length, 23.5cm width, and 75cm height among our heat sink product line. It is ideal for customers looking for heat sink with 100W or lower power to provide low energy consumption...
  • DJR300B Industrial Heat Sink The DJR300B industrial heat sink measures 158mm×26.1mm×105mm which is a medium-size model in our product line. The black housing can improve the emittance and heat dissipation to some extent. The black coating also contributes to the anti-oxidation property...
  • DJRFS200 Industrial Heat Sink The DJRFS200 industrial heat sink has integrated with fan system to speed the heat conduction and dehumidification. Equipped with special aluminum alloy heating panel section and high-quality nichrome heating wire, this product can be made quite small and elegant.

We provide various products such as split core current transformer, current transformer, transformer, inductor, industrial heater, and energy saving module which can be used in electric energy meter, communication device, and measuring instrument.